Ti-SAK Scales - Raven Black

Materials:

• 6AL-4V Titanium
• 316 Stainless Steel Machine Screws

Approx. Dimensions:

• Height: 91mm
• Width: 18.03mm Tapers to 20.06mm
• Thickness: 3.9mm

Features

• Fully Shaped and Contoured Titanium
• SPD Edition Laser Etched "Raven Black Finish" Pattern
• Titanium Biller Pocket Clip
• Standard 3 Hole Pattern Allows for Other Aftermarket Pocket Clips
• Slot for Factory Pen Accessory
• Slot for Factory Tweezers
• Slot for Factory Toothpick
• Slot for Factory Stick Pin
• SPD Kraken Trident Laser Mark

Approx. Weight:

• 1.46oz

SAK (Swiss Army Knife) NOT INCLUDED

Modifying your 91mm SAK with these titanium plates is done at your own risk. This is a DIY modification. Install carefully, know what you are doing, and know how to operate a vise or clamps safely. Prometheus Design Werx, INC cannot be held responsible for any damage caused to your SAK or the titanium plates during installation. Please click here for step-by-step installation instructions.

Please note that these are intended to permanently replace the factory plates. They are precision machined to fit the brass ferrules of a 91mm SAK and fit easily with a vise or pliers and a piece of leather to line the jaws.
* Caution, when using other 3-hole pocket clips, make sure to use the correct length machine screws so they are not so long that they will pull out the titanium plate.